Section 4 | Detailed Parameters | DriveRack | ™ |
| |||
|
|
|
Noise Level -10 to 10 (Mixer and Router)
Adjusts the overall level of the pink noise generator.
4.12 Output
The output section 480, 481 and 482 DriveRack™ units provide the user with the ability to con- trol output levels of the unit and adjust phase compensation of loudspeakers within the signal path. The output level control is located in the signal path before the compressor/limiters; this means that the compressor/limiter directly affects the output level. The parameters for the Phase Compensation effect are as follows and are user adjustable. Please refer to section A.9 of the Appendix for a complete output signal routing diagram.
Shift On/Off
This parameter is used to turn the selected output phase parameters on or off. When level is off, phase is 00 and polarity is positive.
Polarity On/Off
This parameter is used to reverse the polarity of the output signal.
Phase 0 to -1750
This parameter sets the amount of phase within the selected output path. The phase is refer- enced to the upper frequency of the selected output crossover band.
®
38
