DriveRack™ | Utilities/Meters | Section 5 |
•Once you have entered your security password, press the STORE button to store the password and the clearance level will be changed. To abort this procedure at any time, press PROGRAM/CONFIG button.
•Press the PROGRAM/CONFIG button to return to normal operation.
•After a user with medium or high clearance has completed any edit changes, he or she must remember to set the security level back to low for normal use.
The 260 DriveRack units allow you to set the unit to either scroll through programs in a sequen- tial manner, or create custom program lists from within the Utility menu. This list makes it con- venient for restricting access to a small list of programs. The program list cannot be changed if the security level is set to lockout access to the program list. The procedure for setting up the program list is as follows.
From Program mode, press the UTILITY button and use the PREV PG and NEXT PG but- tons to move to the page that appears something like this:
Program List |
|
List Size | 10 |
List Index | 1 |
Program 1 |
|
|
|
•Note that the underscore indicates the currently selected parameter for editing. To select parameters to edit from the current page, press the DATA wheel until the underscore is under the parameter that you wish to edit.
•Press and then rotate the DATA wheel to select List size.
•Once this has been selected, rotate the DATA wheel to set the desired list
size and then press the NEXT PAGE button. Press the DATA and for each index in the list, select which program you want the current users to access. The index number is the position of the selected program in the list. To change the number (when it is selected), rotate the DATA wheel.
Prog Change Mode |
|
Program List |
|
Prog Lock | 24 |
®
DriveRack™ User Manual | 45 |
|
|
