Fagor America LFA-019 SS, LFA-019 IX, LFA-013 End Of Program, Power Cuts, Basic Reccommendations

When the dishwasher is in operation and …

-You wish to put an extra plate in the dishwasher.

-You wish to change the wash program

1.Press the Pause button.

2.Put the item in the dishwasher and/or change the wash program.

3.Press the Start button.

I M P O R T A N T

Except if the change interferes in the duration of the selected wash program or is the delay option. They you should press the

ON/OFF button ( ), to change its status.

Please take into consideration that the Start / Pause button is different to the ON / OFF button.

If you press the ON / OFF button during the wash process, you must reprogram the dishwasher.

7END OF PROGRAM

Once the program has finished, the End light will come on and a continuous beep sounds for 3 seconds.

8POWER CUTS

If there is a power cut,	will continue its normal
when the power comes	operation from the point
back on the dishwasher	where it was stopped (it

has a minimum memory of 12 hours, depending on the model).

9BASIC RECCOMMENDATIONS

There are a series of issues which must be taken into consideration to help your dishwasher last longer and wash better.

aFill the dishwasher. Try to make the most of the dishwasher capacity and so reduce water and electricity consumption and lead to quieter operation.

bPosition the dishes properly. For optimum wash quality, the water spray arms must turn freely without obstacles. In the same way, the pieces must be correctly positioned for the water jet to reach them.

cChoice of program. Choose the wash program and the additional functions properly, according to your needs.

dCleaning. Clean the filters and the water spray arms every three months. Also make sure that they are correctly refitted.