Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) | 0.5V to 7.0V |
DC Switch Voltage (VS) (Note 2) | 0.5V to VCC |
| 0.5V |
DC Input Voltage (VIN) (Note 2) | 0.5V to 7.0V |
DC Input Diode Current (IIK) |
|
@ (IIK) VIN 0V | 50 mA |
DC Output Current (IOUT) | 128 mA |
DC VCC or Ground Current (ICC/IGND) | 100 mA |
Storage Temperature Range (TSTG) | 65C to 150 C |
Junction Temperature under Bias (TJ) | 150 C |
Junction Lead Temperature (TL) |
|
(Soldering, 10 seconds) | 260C |
Power Dissipation (PD) @ 85C | 180 mW |
DC Electrical Characteristics
Recommended Operating Conditions
(Note 3)
Supply Voltage Operating (VCC) | 1.65V to 5.5V |
Control Input Voltage (VIN) | 0V to VCC |
Switch Input Voltage (VIN) | 0V to VCC |
Output Voltage (VOUT) | 0V to VCC |
Operating Temperature (TA) | 40C to 85C |
Input Rise and Fall Time (tr, tf) |
|
Control Input VCC = 2.3V - 3.6V | 0 ns/V to 10 ns/V |
Control Input VCC = 4.5V - 5.5V | 0 ns/V to 5 ns/V |
Thermal Resistance (JA) | 250 C/W |
MicroPak 8L Package | 224C/W |
Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend oper- ation outside datasheet specifications.
Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed.
Note 3: Control inputs must be held HIGH or LOW, they must not float.
FSA3357
Symbol | Parameter | VCC |
| TA = 25C |
| TA = 40C to 85C | Units | Conditions | |||||
(V) | Min | Typ | Max | Min | Max | ||||||||
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
VIH | HIGH Level | 1.65 | 1.95 | 0.75 VCC |
|
| 0.75 VCC |
| V |
|
|
| |
| Input Voltage | 2.3 | 5.5 | 0.7 VCC |
|
| 0.7 VCC |
|
|
|
| ||
|
|
|
|
|
|
|
| ||||||
VIL | LOW Level | 1.65 | 1.95 |
|
| 0.25 VCC |
| 0.25 VCC | V |
|
|
| |
| Input Voltage | 2.3 5.5 |
|
| 0.3 VCC |
| 0.3 VCC |
|
|
| |||
|
|
|
|
|
|
|
| ||||||
IIN | Input Leakage Current | 0 5.5 |
|
| 0.1 |
| 1.0 | A | 0 VIN 5.5V |
|
| ||
IOFF | OFF State Leakage Current | 1.65 5.5 |
|
| 0.1 |
| 1.0 | A | 0 A, Bn VCC |
|
| ||
RON | Switch On Resistance | 4.5 |
| 5.0 | 7.0 |
| 7.0 | VIN = 0V, IO = 30 mA |
| ||||
| (Note 4) |
|
|
| 6.0 | 12.0 |
| 12.0 |
| VIN = 2.4V, IO = | 30 mA | ||
|
|
|
|
| 7.0 | 15.0 |
| 15.0 |
| VIN = 4.5V, IO = 30 mA | |||
|
| 3.0 |
| 6.5 | 9.0 |
| 9.0 |
| VIN = 0V, IO = 24 mA |
| |||
|
|
|
|
| 9.0 | 20.0 |
| 20.0 |
| VIN = 3V, IO = 24 mA | |||
|
| 2.3 |
| 8.0 | 12.0 |
| 12.0 |
| VIN = 0V, IO = 8 mA |
| |||
|
|
|
|
| 11.0 | 30.0 |
| 30.0 |
| VIN = 2.3V, IO = 8 mA | |||
|
| 1.65 |
| 10.0 | 20.0 |
| 20.0 |
| VIN = 0V, IO = 4 mA |
| |||
|
|
|
|
| 17.0 | 50.0 |
| 50.0 |
| VIN = 1.65V, IO = 4 mA | |||
ICC | Quiescent Supply Current | 5.5 |
|
| 1.0 |
| 10.0 | A | VIN = VCC or GND |
| |||
| All Channels ON or OFF |
|
|
| IOUT = 0 |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |||
ASR | Analog Signal Range | VCC | 0.0 |
| VCC | 0.0 | VCC | V |
|
|
| ||
RON | On Resistance Match | 4.5 |
| 0.15 |
|
|
| IA = 30 mA, VBn = 3.15 | |||||
| Between Channels | 3.0 |
| 0.22 |
|
|
|
| IA = 24 mA, VBn = 2.1 | ||||
| (Note 4)(Note 5)(Note 6) | 2.3 |
| 0.31 |
|
|
|
| IA = 8 mA, VBn = 1.6 |
| |||
|
| 1.65 |
| 0.62 |
|
|
|
| IA = 4 mA, VBn = 1.15 | ||||
Rflat | On Resistance Flatness | 5.0 |
| 6.0 |
|
|
| IA = 30 mA, 0 | VBn | VCC | |||
| (Note 4)(Note 5)(Note 7) | 3.3 |
| 12.0 |
|
|
|
| IA = 24 mA, 0 VBn VCC | ||||
|
| 2.5 |
| 40.0 |
|
|
|
| IA = 8 mA, 0 | VBn | VCC | ||
|
| 1.8 |
| 140.0 |
|
|
|
| IA = 4 mA, 0 VBn VCC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
3 | www.fairchildsemi.com |
