Technical Specifications, OPERATING INSTRUCTIONS cont

OPERATING INSTRUCTIONS cont.

GETTING TO KNOW YOUR STICK VAC

Motor Thermostat

IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off button once.

•Disconnect the plug from the power source.

•Check the source of overheating problem. (i.e. clogged hose or filter)

•If clogged hose or filter is found, unclog the hose and replace the filters.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for

45 minutes, plug in the cleaner and push the On/Off button. The vacuum should start again.

•If the vacuum still does not start, contact customer service at 1-800-275-9251.

TROUBLE SHOOTING GUIDE

PROBLEM		POSSIBLE REASON	POSSIBLE SOLUTION

			1.	Plug unit in firmly.
	1.	Power cord not firmly plugged into	2.	Check fuse or breaker. Replace
VACUUM WILL		outlet.		fuse/reset breaker.
VACUUM WILL	2.	No power in wall outlet.	3.	Call 1-800-275-9251.
NOT OPERATE	2.	No power in wall outlet.	3.	Call 1-800-275-9251.
NOT OPERATE	3.	Needs servicing.	4.	Turn the unit off and unplug from
	3.	Needs servicing.	4.	Turn the unit off and unplug from
	4.	Thermostat has tripped.		outlet. Allow unit to cool down,
				then restart.

			1.	Empty and clean dust cup.
VACUUM WILL	1.	Dust cup is full.	2.	Turn unit off and unplug from
VACUUM WILL	2.	Unit clogged.		wall outlet. Remove Dust Cup
NOT PICK-UP OR	2.	Unit clogged.		wall outlet. Remove Dust Cup
NOT PICK-UP OR	3.	HEPA Filter needs cleaning or		Filter and check for object(s) in
SUCTION POWER	3.	HEPA Filter needs cleaning or		Filter and check for object(s) in
SUCTION POWER		replacing.		air duct and remove.
IS WEAK		replacing.		air duct and remove.
IS WEAK	4.	Debris screen needs cleaning.	3.	Clean or replace HEPA Filter.
	4.	Debris screen needs cleaning.	3.	Clean or replace HEPA Filter.
			4.	Clean debris screen.

TURBO BRUSH	1.	Dust cup is full.	1.	Empty dust cup.
TURBO BRUSH	2.	Rotating brush or elbow is	1.	Empty dust cup.
DOES NOT	2.	Rotating brush or elbow is	2.	Clear obstructions.
DOES NOT		obstructed.	2.	Clear obstructions.
ROTATE OR		obstructed.	3.	Call 1-800-798-7398.
ROTATE OR	3.	Belt is broken.	3.	Call 1-800-798-7398.
ROTATES	3.	Belt is broken.	4.	Clear obstruction.
ROTATES	4.	Hose obstructed.	4.	Clear obstruction.
SLOWLY	4.	Hose obstructed.	5.	Clean debris screen.
SLOWLY	5.	Debris screen is clogged.	5.	Clean debris screen.
	5.	Debris screen is clogged.

DUST ESCAPING	1.	Dust cup is full.	1.	Empty and clean dust cup.
FROM VACUUM	2.	Dust Cup is not installed correctly.	2.	Review Dust Cup instructions.

VACUUM, HOSE			1.	Remove hose and/or brushes.
VACUUM, HOSE	1.	Hose clogged.		Remove obstruction from hose
OR BRUSHES	1.	Hose clogged.		Remove obstruction from hose
OR BRUSHES	2.	Dust cup is full.		and /or brush.
WILL NOT PICK-UP	2.	Dust cup is full.		and /or brush.
WILL NOT PICK-UP			2.	Empty and clean dust cup.
			2.	Empty and clean dust cup.

1. Hand Grip

2. Telescopic Tube

3. Locking Button

4. Flexible Hose

5. Dust Cup Release Button 1

6. Dust Cup Handle

7. Dust Cup (Container)

8. Main Unit

9. Intelli-SenseTMFilter Monitor

10. Exhaust Filter Cover

11. On/Off Switch

12. Power Cord

13. Floor Brush Release Button

14. Floor Brush

15. Crevice Tool

16. Dusting Brush

17. Telescopic Tube Release Button

18. Dust Cup Release Button 2

19. Cord Hook Release

20. Hose Connector

21. Air Driven Turbo Brush

22. Shoulder Strap (not shown)