![PRECAUTIONARY MEASURES](/images/new-backgrounds/46404/464047x1.webp)
PRECAUTIONARY MEASURES
OPERATING INSTRUCTIONS cont.
IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.
Cleaning & Changing the HEPA Filter (cont.)
PLEASE NOTE: The white pleated
Changing & Cleaning the Pre- Motor Filter
The
1.Do not operate the vacuum cleaner too close to heaters, radiators or cigarette butts.
2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3.Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust cup debris screen.
4.When pulling out the power plug from the wall outlet, pull the plug not the power cord.
5.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.
6.Do not use without HEPA filter in place.
filter material in the HEPA Filter will discolor over time
is properly |
|
"TapCleaned” | Fig. A |
after each use | Wash |
and suction | once a |
does not return | month or |
to 100%, then | when |
we suggest that | suction |
the HEPA filter | appears |
reduced | |
be “TapCleaned” |
|
vigorously until | Warning: Allow 24 |
no more dust | hours for drying before |
can be removed, | replacing in unit. |
then rinsed |
|
|
under the faucet and allowed to air dry for 24 hours before refitting into the
vacuum. (Fig. A) This should be done once a month or when suction appears to be reduced .
CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.
Warning: Always empty the dust cup container and clean the HEPA filter and Debris Screen before each use and during prolonged usage.
Never over fill the dust cup container - remove dirt and clean the HEPA filter and debris screen when dirt in dust cup is at or below the "MAX" level during prolonged usage or risk motor damage.
If you wash the Hepa filter, make sure that it is completely dry before inserting back in the vacuum.
months.
•Remove the dust cup container and the HEPA filter to remove the pre- motor filter.
•Rinse the
•When the filter is dry, replace into the unit and replace the HEPA filter and dust cup container.
•A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent can be used if required.
Filter
Changing & Cleaning the Post Motor Filter
The post motor filter is a washable filter but should be replaced every three (3) months.
• Remove the filter cover from the front |
of the unit and remove the filter. |
• Rinse the post |
motor filter in |
lukewarm water |
and air dry the |
filter completely |
for 24 hours. Do |
not use a washing |
machine to rinse |
3
Please Note: The HEPA Filter is |
|
washable. It should, however, be |
|
replaced every six (6) months to ensure |
|
peak performance of your vacuum. |
|
Both the |
|
Filters are washable. They should |
|
however be replaced every three (3) |
|
months to ensure peak performance of |
|
your vacuum. |
|
Important: Make sure that ALL filters |
|
are completely dry before |
|
back in the vacuum. | 8 |
|
the filter. Do not |
use a hair dryer to |
dry it. Air dry only. |
Never operate the |
vacuum without the |
post motor filter in place. |
• When the filter is dry, replace into the |
filter cover and replace the filter cover |
to the unit. |
• A severely soiled or clogged filter |
should be thoroughly washed with |
fresh tepid water. A mild detergent |
can be used if required. |