Operations
Before you clean
1.Move furniture to another area if cleaning an entire room (optional).
2.Vacuum area with a dry vacuum cleaner before deep cleaning.
3.Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.
4.Pretreating (optional)
Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entry ways and hallways.To pretreat:
A.Using the BISSELL Tough Stain
B.Wait
C.Clean as normal using your BISSELL PROheat®.
Fill the 2-In-1 water tank
1.Remove the tank from the base of the machine by lifting the tank carry handle.
2.Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup.
3.Fill with BISSELL 2X formula to the indi- cated fill line on the built in measuring cup and pour into mouth of the bladder.
4.Fill the bladder with clean hot tap water. *Do not boil or microwave water as it can destroy the bladder.
5.Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the car- rying position to latch the lid.
Note: Remember to secure the lid and test to make sure it is secure before picking up the tank.
6.Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position.
| EXIT |
|
| 9 |
|
|
|
| 11 | 10 |
|
| |
| 12 |
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
5 |
| 6 |
| 7 |
|
|
|
|
|
| 3' | ||
|
|
|
| 1 | ||
|
|
|
|
| T | |
|
|
|
|
|
| |
|
|
|
|
| AR | |
|
|
|
| 2 | ST |
|
|
|
|
| HERE | ||
|
| 3 |
|
| ||
4 |
|
|
|
| 4' | |
|
|
|
|
|
| |
ATTENTION:
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.
1.2.
3.4.
5.6.
9
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
