Operations
Hard Floor Cleaning
Select Models Only
Your deep cleaner may have included a hard floor tool and Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for lino- leum, vinyl, and tile floors.
Caution: Do not use on unsealed hard- wood floors.
1.Thoroughly vacuum or sweep floor to pick up any debris.
NOTE: Prior to filling with formula and water be sure all carpet clean- ing formula is thoroughly rinsed from tank.
2.Fill BISSELL 2X Hard Floor Solutions Formula to the indicated fill line in the built in measuring cup and pour into mouth of bladder.
3.Fill the bladder with clean hot tap water and set aside.
4.Attach the hard floor tool to the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place.
5.Be sure the ReadyTools dial is set to
"FLOOR CLEANING".
6.Plug into an outlet and turn the power on.
7.Plan your cleaning route to leave an exit path. Be sure to allow adequate time for floors to dry.
8.While pressing the spray trigger, make one slow forward wet pass and another back. Caution: Do Not Overwet.
9.Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water.
10.When finished, remove hard floor tool, rinse and let dry before storing. Refer to the Maintenance section on page 15 for machine clean up and storage instructions.
WARNING:
To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL bare floor tool kit
4.
14 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
