Assembly
Your PROheat comes in four, easy to assemble components:
Handle Assembly
Upper Hose Rack Lower Body Lower Hose Rack
The only tool you will need to assemble your cleaner is a Phillips
head screwdriver.
1.Slide handle assembly onto lower body and secure with two long screws.
Warning:
Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures.
2.Attach upper hose rack to back of handle assembly by pushing into open slots and sliding down until it snaps into place.
3.Attach lower hose rack by sliding in place on lower body assembly and securing with 2 short screws.
4.Attach Tough Stain tool to end of hose.
5.Wrap flex hose around hose rack and secure it into notched out holder as shown.
6.Keep flex hose locked in place with hose secure latch.
Tip: Deep cleaning carpeting regularly can reduce dust and allergens in your home.
1.
2.
3.
4.
5. | 6. | Hose | |
Secure | |||
|
|
Latch
6 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
