Operations

ReadyTools

Your PROheat deep cleaner comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more.

Important! If using the machine to clean upholstery, check upholstery tags.

1.Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your PROheat. If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only,” do not proceed. Do not use on vel- vet or silk. If manufacturer’s tag is missing or not

coded, check with your furniture dealer.

2. Check for colorfastness in an inconspicuous place.

3.If possible, check upholstery stuffing. Colored

 

stuffing may bleed through fabric when wet.

Manufacturer’s tag

4. Plan activities to give upholstery time to dry.

 

5.

Vacuum thoroughly to pick up loose debris

 

 

and pet hair. Use a vacuum with a brush

 

 

attachment and a crevice tool to clean fabric

 

 

folds and tufts.

 

6.

To begin cleaning with attachments, follow

 

 

the instructions on page 9 for filling the 2-in-1

7.

 

water tank.

7.Set the ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose.

8.Attach the cleaning tool of your choice to the end of the hose.

9.Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface.

Release the trigger to suction dirty water. Continue to clean in the area, working in small sections, until dirt is removed.

Caution: Do Not Overwet.

10.When finished cleaning, remove and rinse tool(s) in clean, running water.

12 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 12
Image 12
Bissell 2SA3 warranty ReadyTools, Water tank, Instructions on page 9 for filling the 2-in-1