Problem Solving, Ordering Replacement Dust Cup Filters

PROBLEM SOLVING

This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience.

PROBLEM		POSSIBLE CAUSE		POSSIBLE
			1.	Plug in firmly, push on/off switch
	1.	Not firmly plugged in.		to on.
	2.	No electricity in wall outlet.	2.	Check fuse or breaker.
Cleaner Won’t Run	3.	On/Off switch not turned on.	3.	Push on/off switch to on
	4.	Thermal protector tripped.	4.	Reset thermal protector.
	5.	Blown fuse/tripped breaker.	5.	Reset circuit breaker or replace
				fuse.
	1.	Full or clogged dust cup.	1.	Clean dust cup.
	2.	Clogged nozzle or dust cup port.
			2.	Remove obstruction.
	3.	Clogged hose.
			3.	Remove obstruction.
	4.	Hole in hose.
			4.	Replace hose.
Cleaner Won't Pick	5.	Hose not inserted fully.
			5.	Push hose in securely.
Up	6.	Motor protection system activated.
			6.	Reset thermal protector.
	7.	Dirty filters.
			7.	Clean / change filters.
	8.	HEPA filter needs cleaning or
			8.	Clean or replace HEPA filter.
		replacing.
			9.	Clean debris screen.
	9.	Debris screen needs cleaning.


Air Flow Restricted	1.	Attachment use restricts airflow.	1.	Check attachment.
With Attachment	2.	New carpet trimmings clogging air
			2.	Remove obstruction.
Use Sound Changes		passage.

ORDERING REPLACEMENT DUST CUP FILTERS

TO ORDER REPLACEMENT FILTERS OR FOR TECHNICAL

SUPPORT

HEPA Filter Item # XF732H

for Model FM732H

Call:

1 (800) 275-9251

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note:

The HEPA Dust Cup Filter may be washed. We recommend that this be done once a month or when suction appears reduced. To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap until all observable dirt has been removed. Some discoloration of the HEPA filter material may occur, this is normal and will not affect the filter's performance. When finished, shake off excess water. Do NOT wash in dishwasher. It is important that when you wash the HEPA dust cup filter, you allow it to dry COMPLETELY before using it again. We recommend 24 hours to air dry. DO NOT DRY IN DRYER. We recommend replacing the HEPA filter every three

(3)to six (6) months, depending on the amount of use to ensure peak performance of your vacuum.

IMPORTANT: The Pre-Motor filter and Post Motor filter should be replaced every 6 months or sooner if required. It is important that when you wash the HEPA dust cup filter, pre-motor filter or the exhaust filter you allow them to dry COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY IN DRYER.

All filters should be checked regularly for signs of damage, preferable after each cleaning task. The filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical outlet when checking the filters.

GETTING TO KNOW YOUR CANISTER VACUUM

1.	On/Off Button	12.	Receptacle For Motorized Brush
2.	Cord Rewind Button		Power Cord
3.	Carrying Handle	13.	Motorized Brush Power Cord
4.	Dust Cup (Container)	14.	Telescopic Tube
5.	Dust Cup Handle	15.	Motorized Brush
6.	Dust Cup Full Indicator	16.	Motorized Brush On/Off Button
7.	Hose Connector Inlet	17.	Head Light
8.	Hose Connecting Power Cord	18.	Floor-to-carpet Brush
9.	Hose Connecting Power Cord	19.	Upholstery Brush
10.	Hose Connector	20.	Crevice Tool
11.	Flexible Hose	21.	Furniture Guard

* Illustrations may differ from actual product.

Technical Specifications

Main Unit:	Voltage:	120V., 60Hz.
	Power:	10.3 Amps

With Motorized Power Head: Voltage: 120V., 60 Hz.

Power: 12 Amps

Fantom Vacuum Problem Solving, Ordering Replacement Dust Cup Filters, for Model FM732H

Models: FM732H