REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
1 parallel position and turn it over.
Loosen
2 Using a Philips screwdriver, loosen the screw on the bottom plate and
Screw
slide the latch in the direction of the arrow.
3 Lift the bottom plate off.
Latch
Mounting screw
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate | |
1 into the groove on the nozzle housing | 2 screwdriver and slide the latch in the |
and set the bottom plate in place. | direction indicated by the arrow. |
| Tighten |
Bottom Plate | Screw |
| Projection |
Groove |
|
Turn the vacuum over |
|
3 and place in the upright position. | Latch |
15