Faria Instruments 2141, FICHT Engines owner manual Fuel Remaining Alarm Setting

for re-use or left to continue to accumulate fuel usage.

Fuel Remaining

Displays the fuel remaining based on a manually entered amount of fuel minus the amount of “Trip Fuel Consumed”. Display shows “REMXXX.X”. This reading is independent of the fuel “gauge” reading.

In normal use the amount of fuel in the fuel tank is adjusted manually (see below) when the fuel tank is filled so that this display shows the total amount of fuel in the tank. The Trip Fuel Consumed is then reset to zero. As fuel is used (displayed in the Trip Fuel Consumed) this display will show the decreasing amount of fuel remaining.

Pressing the “mode-M” for more than one second will access the option available for this function.

M Mode

Button

a)Add to or remove gallons from the Fuel Remaining. Display shows “R+-XXX.X”. Holding the “Up” button will increase the

Up

Button

amount and holding the “Down” button

menu to fuel remaining.

This feature allows the operator to accurately set the amount of fuel in the fuel tank when adding fuel. The accuracy of this manually entered value directly affects the Fuel Remaining and Fuel Remaining Alarm functions, and should be done carefully.

Fuel Remaining Alarm Setting

Displays the setting for the “Low Fuel” alarm. The display shows “ALRXXX.X”. When the “Fuel Remaining” reaches this amount, the “Low Fuel” alarm will sound and a warning LED will flash in the display. The display will automatically go into “set” mode to allow the operator to reset the alarm value to a lower value to turn off the alarm if desired. If the option is set to zero, the “Low Fuel” alarm will be disabled.

Pressing the “mode-M” for more than one second will access the option available for this function.

M Mode

Button

a)Set the amount of fuel remaining when the alarm will go off. The display shows “A+-XXX.X”. Holding the “Up” button

Up

Button

Down

Button

will decrease the amount. Holding the “mode-M” button for more that one second will set the remaining fuel to the value shown in the display and return the

will increase the amount and holding the “Down” button will decrease the amount.

Down

Button

Holding the “mode-M” button for more that one second will set the fuel alarm to the

Page 7