INSTALLATION

WINDOW INSTALLATON

9.Cut two pieces of adhesive back foam seal to height of window opening. Remove backing and apply to window frame and sliding sash that will rest against unit (Fig. 5).

10.Slide unit onto support platform. Be sure unit side channel butts against vertical edge of window frame.

Note: If unit side channel does not fit securely, remove unit and readjust leveling bolt.

11.Drill two 1/8” holes through window channel frame in alignment with existing holes in bottom bar. Install two (2) 3/8” long self-tapping screws through these holes. If window channel frame is not tall enough to use existing holes, drill (2) new holes off to the side of the existing holes to attach the unit bottom bar to the support platform. Unit should be firmly anchored to window channel frame or support platform (Fig. 6).

12.Slide inside window sash closed. Be sure vertical edge of inside window sash is pressed firmly against side of unit cabinet. Cut remaining adhesive back foam seal to width of window opening. Remove backing and apply to top inside edge of window frame (Fig. 5).

13.Install speed clips on top and bottom inside edge of window to provide locking (Fig. 7).

14.Using supplied plastic foam seal, cut to proper length, insert between inside window sash and outside window (Fig. 7).

15.Place top retainer on top edge of filler panel, (Fig. 5) then place the bottom edge of filler panel into groove of bottom retainer (mounted on unit). Filler panel may be trimmed with knife or scissors to fit window height.

16.Slide sliders upward making sure filler panel aligns in sliders (Fig. 5).

17.With sliders up against top retainer, drill 1/8” hole through window frame in alignment with existing hole in slider. Install 3/8” long self-threading screw in hole. Repeat for other slider (Fig. 6 & 7).

18.Check all seals and plug all air leaks around unit. Use sealant to fill any minor openings.

Fig. 5

B

A

C

D

A

E

A

Foam Seal

D Sliders

B

Top Retainer

E Side Channel

CFiller Panel

Do not obstruct the air intake area of your air conditioner, as this could cause overheating, thus activating the units security switch and shutting off the unit. Do not block aiflow inside with blinds, curtains, or furniture. Do not block airflow outside with shrubs, enclosures, or other buildings.

Fig. 6

A

 

B

C

 

D

A Widow Channel Frame D 3/8” long self tapping screws

BDrilled Holes

CBottom Bar

Do not drill a hole in the bottom pan. Unit is designed to operate with approximately 1/2” of water in bottom pan.

4

Page 3 Page 5
Page 4
Image 4
Fedders A6V05S2B important safety instructions Filler Panel
Page 3 Page 5

A6V05S2B specifications

The Fedders A6V05S2B is a versatile and efficient air conditioning unit that has garnered attention for its impressive performance and innovative features. Designed to provide optimal comfort in various environments, this model is ideal for both residential and commercial applications.

One of the main features of the Fedders A6V05S2B is its high cooling capacity. With a cooling output of 5,000 BTU, this unit can effectively cool rooms up to 200 square feet, making it suitable for living rooms, small offices, and bedrooms. The unit's energy efficiency is another defining characteristic, boasting an Energy Efficiency Ratio (EER) that meets or exceeds industry standards. This means lower electricity bills and reduced environmental impact, making it an attractive choice for eco-conscious consumers.

The unit employs advanced technologies such as a rotary compressor and a refrigerant that complies with environmental regulations. The rotary compressor ensures a quieter operation while maintaining a consistent temperature, enhancing user comfort. Additionally, the Fedders A6V05S2B is designed with a convenient electronic control system that allows users to easily adjust settings. The digital display and remote control make operating the air conditioner effortless.

Another significant feature is the multiple cooling and fan speeds available with the unit. Users can select from high, medium, and low fan speeds, allowing for customized airflow tailored to individual preferences. The unit also includes a programmable timer that can be set to turn the AC on or off at specific times, promoting convenience and energy savings.

Moreover, the Fedders A6V05S2B is equipped with a washable air filter, which helps maintain indoor air quality by trapping dust, allergens, and other particles. Regular maintenance of the filter ensures optimal performance and longevity of the unit.

The sleek design of the A6V05S2B allows it to blend seamlessly into various decor styles, while the lightweight construction facilitates easy installation. With a range of features designed for user convenience and comfort, the Fedders A6V05S2B stands out as an excellent choice for those seeking reliability and efficiency in their cooling solutions.
Top Page Image Contents