Fedders A6X05F2D Installation in window 19” to 22” wide, Room Air Conditioner

Models: A6X05F2D

1 24
Download 24 pages 53.33 Kb
Page 4
Image 4
Installation in window 19” to 22” wide

Room Air Conditioner

3.To overcome storm window interference, securely attach 2” wide wood strips to the window stool and sill, with screws. Strips should be as long as window opening and flush with back side of stool. Thickness of strips should be controlled by amount of interference (Fig. 3).

4.Keeping a firm grip on air conditioner, carefully center air conditioner in window opening with the bottom bar between the window stool and the angle bracket. Air conditioner should slant slightly downward on the outside as shown by half a bubble off on a carpenters level. This outward pitch prevents water from entering the room (Fig. 3).

5.Close the window until it touches behind air conditioner top bar. Slide filler panels outward until they touch window sash tracks. (Do not release grip on air conditioner until lower window sash is in final position) (Fig. 3).

3

Upper

Lower

Window Sash

 

Window Sash

 

Top bar

 

 

Level

Bottom

 

bar

 

 

Bracket

 

Wood Strips

 

(optional)

6.Secure top of filler panels by driving 5/8” long wood screws into window sash through mounting holes in top slides.

7.Secure bottom of filler panels by driving 5/8” long screws into window sill through filler panel tabs.

8.Cut foam seal to width of window and install between upper and lower window sash (Fig. 4).

Caution: Do not drill a hole in bottom pan. Unit is designed to operate with approximately 1/2” of water in bottom pan.

Installation in window 19” to 22” wide

(Do not attach filler panels for this application)

1.Refer to steps 1 and 2 of preceding instructions.

2.Close window until it touches behind top bar (Fig. 4).

4

Lower

Foam Seal

 

Window Sash

 

 

5/8” Wood Screws

 

 

Wood Sill

 

 

Filler Panel Tab

3.Fasten lower window sash to window frame using finishing nails, wood screws, or “L” brackets (Fig. 5).

4.If filler is required on sides of air conditioner, cut foam seal to size and fill both sides.

5.Cut foam seal to width of window and install between upper and lower window sash (Fig. 4).

5

 

 

Nails / Screws

 

L-Bracket

3

Page 4
Image 4
Fedders A6X05F2D important safety instructions Installation in window 19” to 22” wide, Room Air Conditioner