Fedders R407C service manual II. Hand-held Transmitter, Applicable on Heat Pump Unit

II.Hand-held Transmitter

Operating Voltage	: 3.0 Vdc.
Power Source	: 2 "AAA" size batteries
Battery Life Expectancy	: more than 1 year
Range of Transmission	: at least 8m from the infrared sensor of the receiver module
Angle of Transmission	: 45° about normal
Medium of Transmission	: infrared transmission

The hand-held transmitter has an iconic LCD panel that displays the following information:

i)Iconic representation of current mode of operation

ii)Value of set/desired room temperature

iii)Iconic representation of current indoor fan speed

iv)Iconic representation of current vane position

v)Vane swing icon, appears if vane swing function has been activated.

vi)12-hour format display of time of the day

vii)On/off timer settings, if timer function has been activated

viii)Sleep function icon, if sleep function has been activated

ix)Arrow icon to indicate the sequence of ON/OFF timer actions

x)“Signal transmitted” icon to indicate that transmission of command code to receiver is being done.

The hand-held transmitter has one button for each of the following functions in manual operation:

a) POWER ON/OFF button		Toggles the air-con ON and OFF
b)	∧, the “Temperature	Increases the set temperature
	Increment” button
c)	∨, the “Temperature	Decreases the set temperature
	Decrement” button
d) MODE button		Toggles the mode of operation between AUTO,
		COOL, DRY, FAN and HEAT (Heat Mode only
		applicable on Heat Pump Unit).
e) FAN button		Toggles the fan speed between LOW, MEDIUM, HIGH
		and AUTO.
f) SWING button		Causes the vane to be moved up and down continuously.
g) VANE button		Toggles vane position between ANGLE, DOWN,
		MIDDLE and AUTO.
		F2