h) | CLOCK button | Starts and stops the setting of time of the day. |
|
| Deactivates timer function. |
|
| The accuracy of the time setting must be + / - 15 second |
|
| per day. |
i) | SLEEP button | Activates / deactivates sleep function |
j) | START button | Activate / deactivate ON timer |
k) | STOP button | Activates / deactivates OFF timer |
l) | HR. button | Adjusts the hour setting of the time of the day if the |
|
| CLOCK button has been pressed prior to this step. Adjust |
|
| the hour setting of the ON/OFF timer if the Start/Stop |
|
| button has been pressed. |
m) | MIN. button | Adjusts the minute setting of the time of the day if the |
|
| CLOCK button has been pressed prior to this step. Adjust |
|
| the minute setting of the ON/OFF timer if the Start/Stop |
|
| button has been pressed. |
(a)to (d) and (i) are exposed buttons. The remaining buttons are concealed behind a hinged door.
A "beep" sound, acknowledging the reception of a valid infrared signal will be generated by the main receiver board if a valid button is pressed.
III. Receiver Module
Input Voltage: | 220/240 Vac ±10%, 50/60Hz. |
Power Relay Contact Ratings: | 240Vac/30A, for compressor. |
| 240Vac/5A, for indoor fan motor, outdoor fan motor |
| and |
1.Main Receiver Board
Main board, where the dual
It also holds a push button switch called Operation/Filter Reset Button. Main receiver board material must be PR4 Grade.
F3