Installation
•Plug one end of the enclosed power cord (inside the waste box) into the power supply receptacle in the back of the shredder.
•Screw casters into the nuts provided on the underside of the shredder.
•Operate this product only from the type of power source indicated on the marking label.
•Install the paper shredder so that the plug is easily accessible.
•Operate shredder only in the upright position.
•Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder, maintain a minimum distance of 4” (10 cm) from walls or furniture on each side of the shredder.
Caution
Never insert hand, fingers or any foreign objects into the feed opening.
Serious injury may result.
Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects away from feed opening.
Injury may result.
Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation.
Serious injury may result.
Operation
Read operating instructions before putting shredder into operation.
Insert power cord into power supply receptacle on the back of the shredder.
Insert plug into power outlet.
Install waste bag for shredded material
•Open door and completely remove wastebox from cabinet.
•Fold new bag around frame. Allow bag to overhang waste box by approximately 7” (20 cm).
•Slide box with bag back into cabinet.
•Close cabinet door.
Switching equipment On
• Press rocker switch to (I)
• Switch locks in “on” position
•Equipment is ready for operation (stand by)
•Green LED lights
•Feed paper
•The shredding process is started by
•When the shredding is complete, the cutting system automatically stops after approximately 3 seconds.
Switching equipment Off
• Press rocker switch to (O)
A
B
C
D
E
F
7
