Fellowes 280 Maintenance, Supplies, Warranty, Shredder Oiling Instructions, Repeat the procedure

Models: 280 380CC 280CC 320CC

1 11
Download 11 pages 62.78 Kb
Page 9
Image 9
Maintenance

Maintenance

(Cross Cut Units Only)

Shredder Oiling Instructions

When shredding capacity drops, noise increases, or if the cutting cylinders stop with a squeak or a rubbing sound, the cutters should be oiled.

When lubricating the cutters, utilize POWERSHRED lubricant #35250 or a suitable substitute, i.e., a light weight machine oil or a sewing machine oil. Do not spray an aerosol cleaner or lubricant into the machine. Some agents may combust, causing serious injury. Make certain an extension nozzle is provided so the lubricant can reach well into the throat of the machine.

Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system forward for a few seconds (the photo eye must be blocked with a piece of paper in order to run the cutting system forward).

Then depress the rocker switch in the reverse direction and run the cutting system in reverse for a few seconds.

Repeat the procedure.

Supplies

Bags for cut material (Packed in dispenser carton, 50 bags to a roll. Contact Fellowes or your local Fellowes dealer for the stock number of the bag that fits your machine.)

Cutting block oil for cross-cut units: Stock #35250

Replacement wasteboxes and handles are available from Fellowes. Please call Fellowes customer service for ordering information.

Warranty

Fellowes Powershred Limited Warranty

1 year on all parts and labor

5 years parts and labor on cutting cylinders

Fellowes warrants this product to be free from defects in material and workmanship for a period

of one year from the date of purchase by the original consumer. At it’s option, Fellowes will repair or replace without charge for material or labor, any component found to be defective during the warranty period. Additionally, the cutting cylinders are warranted for 5 years from the original purchase date and will be replaced without charge for material or labor if found by Fellowes to be defective.

Warranty Exclusions

The parties agree that the buyer’s sole and exclusive remedy against Fellowes shall be for the repair or replacement of defective parts as provided herein. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to property or any other incidental or consequential loss) shall be available to him. This warranty shall NOT apply and is void under the following circumstances:

1.When this product or any part thereof has been subjected to accident, alteration, abuse, or misuse.

2.When the shredder's recommended sheet capacity (per specifications on page 5-6) has been exceeded (resulting in a paper jam).

3.When the original Model and Serial Number Plate has been altered, effaced or removed.

4.When repair or service covered under this warranty (other than routine maintenance as described in the Owner's Manual) has been performed by personnel without the express written consent of Fellowes.

5.When the product has been used pursuant to any verbal or written rental, lease or loan agreement.

This warranty described herein shall be in lieu of any other warranty, expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Any representations or promises inconsistent with or in addition to this warranty are unauthorized and shall not be binding upon Fellowes.

A

B

C

D

E

F

9

Page 9
Image 9
Fellowes 280 Maintenance, Supplies, Warranty, Shredder Oiling Instructions, Repeat the procedure, Cross Cut Units Only