Fellowes AP-300PH, AP-230H manual Air Quality Sensor Cleaning

Models: AP-230H AP-300PH

1 32
Download 32 pages 37.09 Kb
Page 10
Image 10
Air Quality Sensor Cleaning

4.Place the new filters in the main unit. (True HEPA Filter should always be inserted first, then the Carbon filter.)

5.To reset the filter light once a new True HEPA and/or Carbon Filter is installed:

a.Plug the unit back in with the front cover off.

b.Turn on the unit.

c.Locate the filter replacement button on the display panel.

d.To choose which filter light to reset, press the filter replacement button for 1 second at a time to toggle between the True HEPA and Carbon Filter icons.

e.Press and hold the filter replacement button for 3-5 seconds. A short beep will be heard and the light should turn off.

f.Place the front panel on the unit and the air purifier is ready to use.

Air Quality Sensor Cleaning

Lightly vacuum the air quality sensor every two months after removing the front panel.

10

Page 10
Image 10
Fellowes AP-300PH, AP-230H manual Air Quality Sensor Cleaning