Fellowes Jupiter A3 manual Tips, Before YOU Laminate, Cold Lamination Steps

TIPS

•Always put item in a pouch. Never laminate an empty pouch.

•Trim excess pouch material from around your item after laminating and cooling.

•Clean laminator rollers with Fellowes roller wipes (item #5703701) after 15-20 applications to guarantee optimum laminating results. For further details, please see “maintenance” section.

•Before laminating valuable items, do a test run with an item similar in size and thickness.

•Do not laminate heat-sensitive documents (i.e., tickets, ultrasounds, etc.).

•Use a dry-erase marker for writing on laminated pouches.

BEFORE YOU LAMINATE

Use Fellowes® brand pouches (Enhance80 – Protect175) for best results. Select correct pouch size for laminated item.

Position laminator so you have enough space to allow items to pass freely through the machine.

COLD LAMINATION STEPS

CAUTION: Only use self-adhesive pouches when laminating with a cold setting.

1	2	3		4
				80	100	125
		80	100	125
				175
		175

1.Please connect the laminator to the socket using the separate power cable supplied.

2.Switch laminator on with

Power On / Off button at back of machine.

3.Press Stand-by button at left of front operating panel to switch laminator on.

4.Use navigation keys to select setting for cold lamination.

5		6	7	8
80	100	125
175

5.Confirm your selection by pressing “Enter” button in the middle of navigation keys. “Wait” LED

() will stop flashing and beep will sound when laminator has finished temperature adjustment.

6.Centre item on clear side against sealed edge; documents cannot be repositioned once laminated.

7.Peel a small part of the protective sheet away from document.

8.When the “wait” LED () stops flashing, place pouch, sealed edge first, into laminator entry. Keep pouch straight and use the edge guide to centre it. Continue peeling the protective sheet away.

3