BASIC SET UP AND SHREDDING OPERATION
CASTER INSTALLATION |
|
|
|
|
1 | 2 | 3 | 4 | 5 |
Continuous operation:
NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond
PAPER OR CD/CARD
1 | 2 | 3 | 4 | 5 |
Plug in and put | Press ( ) ON to | Feed paper straight into | To shred CDs rotate | Hold CD/card at edge, |
disconnect power | activate (blue) | paper entry and release | CD flap into place | feed into CD/Card flap |
switch in ON (I) position |
|
|
| entry and release |
6
When finished shredding set to OFF (
)
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
SET-UP AND TESTING
MISFED PAPER
1
Feed into paper entry and release
23
If too many sheets, indicator will | Remove several sheets until the | ||||
light up to red and shredder will | indicator is below red and the | ||||
not take paper | shredder will take the paper | ||||
|
|
|
|
| |
| 2 |
|
| 3 |
|
|
|
|
|
|
|
1
If paper is misfed and stops shredding, all indicator lights will illuminate and shredder will pause for
2
AUTO
Automatic correcting action will power through the misfed paper, so shredding can continue (do not add more paper during flashing)
2 
3
If Remove Paper icon ( 
) is
illuminated, press reverse and remove paper
3
Shredder will take fewer sheets, | Increase the number of sheets |
but if indicator is below yellow, | being fed up to the top yellow light |
you can add more sheets without | to maximize your productivity |
fear of jamming |
|
If there is too much paper for the shredder to power through, it will reverse the paper out for easy removal
Reduce paper quantity to an acceptable amount and refeed into paper entry
*100% Jam Proof when used in accordance with user manual
3
