Front Panel
A.INPUT — Plug your guitar in here.
B.VOLUME — Adjusts the loudness of the Clean channel.
C.TREBLE / BASS — Adjusts the tone character of the Clean channel.
D.DRIVE* — Selects the Drive channel, as indicated by the LED.
E.GAIN — Adjusts the distortion level of the Drive channel.
F.VOLUME — Use together with the Gain {E} knob to control the loudness of the Drive channel.
G.TREBLE / MID / BASS — Adjusts the tone character of the Drive channel.
H.REVERB* — Adjusts the level of the Reverb effect.
I.EFFECTS ADJUST — Press to adjust either Chorus or Delay using the Time/Rate, Mix and Depth knobs.
NOTE: You must turn to activate the Time/Rate, Mix and Depth knobs after you switch between effects, otherwise the knob positions will not show the actual settings for the newly selected effect.
J.TIME/RATE —
Delay: Adjusts the interval between delayed repeats.
Chorus: Adjusts the speed of the chorus sweep.
K.DELAY* — Press to activate the Delay effect, as indicated by the LED.
L.MIX — Adjusts the level of the Delay and Chorus effects. The Chorus effect in the VM amplifier will deliver a chorus effect with Mix set near the center of its range, or a true pitch- shifting vibrato effect with Mix set to "10."
M.CHORUS* — Press to activate the Chorus/Vibrato effect, as indicated by the LED.
N.DEPTH —
Delay: Adjusts the number of delayed repeats.
Chorus: Adjusts the intensity of the chorus/vibrato effect.
O.POWER JEWEL — Indicates the amplifier is on.
*Footswitchable: You can activate this control remotely from the included
Vacuum Tubes
Your new Fender® amplifier comes equipped with the highest quality tubes available, sourced from various manufacturers all over the world. Because of occasional irregularities in supply, the specific tube type used in each amplifier is subject to change without notice.
When replacing output tubes, please note the specific tube markings on the original tubes factory supplied with your amplifier. For example, 6L6 output tube types used by Fender include, but are not limited to: 6L6GC; 6L6WXT; 6L6C; 6L6GE; etc. The installation of a different type may require significant adjustment by a qualified technician to avoid reduction in performance and tube life.
Additionally, Groove Tubes™ sorts and tests many of our output tubes, and paints them with a
6L6WXT tubes, then a new set of White 6L6WXT tubes will be the perfect direct replacement.
If you have questions or concerns, contact your Fender dealer or authorized service center.
Tube locations left to right at rear:
����� �����
����� �����
�� | �� |
�� | �� |
�� | �� |
fender.com | 7 |
