Fender Power Stage 100 FULL MIX MONITOR SET UP

FULL MIX MONITOR SET UP

1. Connect your microphone to the Mic 1 In.

2. Connect a cord from the Mic 1 Out jack to your

main mixing console. This is a mic level signal.

3. Next, connect a cord from the monitor out on your

mixing console back to the Aux Line In jack on the

PowerStage 100. You now have a full monitor mix

with all effects from your mixing console in the

PowerStage 100. To turn up the full monitor mix,

turn up the Line volume (item C page 4).

4. Remember, turning up the mic 1 volume will

NOT affect the output of the main P.A. system,

but it will affect how much of your "dry" signal

you will hear.