SPECIFICATIONS
DESIGNATION TYPE | PR 200 |
|
| |
OUTPUT POWER | Stereo Continuous sine wave output power, | |||
| both channels driven +/- 1dB, 20 Hz to 20kHz, THD < 0.03% | |||
| 150 W into 8 | Ω | , each channel | |
| 300 W into 4 | Ω | , each channel | |
MONO BRIDGE | 300 W into 16 Ω | |||
| 600 W into 8 | Ω |
| |
SINGLE CHANNEL DRIVEN @ 1 kHz, 1% THD | 8 Ω | 179W |
|
|
| 4 Ω | 312W |
|
|
POWER BANDWIDTH | 10 Hz to 68 kHz | |||
| (3 dB down from rated power at less than 0.1% THD) | |||
FREQUENCY RESPONSE | +0 | |||
RISE TIME | Less than 5.2 µSec | |||
SLEW RATE | Greater than 13.5 V/µSec | |||
TOTAL HARMONIC | 20 to 20 kHz at rated power, 4 Ω . Less than 0.03% | |||
DISTORTION (THD) | ||||
HUM AND NOISE | Below rated output, 4 Ω | |||
| 20 Hz to 20 kHz broad band 95 dB | |||
| IEC A Weight 102 dB | |||
DAMPING FACTOR | Reference, 8 Ω |
| ||
| 5 Hz to 20 kHz Greater than 30 | |||
| 1 kHz Greater than 175 | |||
INPUT IMPEDANCE | Differential 33 kΩ | |||
CHANNEL SEPARATION | Below rated power, single channel operating | |||
| 1 kHz, Greater than 65 dB | |||
SENSITIVITY | Referenced 1 kHz, +/- 0.25 dB | |||
| Stereo Mode +1.8 dBV (1.23V) | |||
| Bridged Mode +1.8 dBV | |||
STATUS INDICATORS | Each | |||
| Power LED (green) | |||
COOLING | Two speed fan |
| ||
GAIN CONTROLS | Continuously variable attenuator, one per channel | |||
MODE SWITCHING | ||||
| switches |
|
| |
POWER REQUIREMENTS | 1000W |
|
| |
DIMENSIONS |
|
|
|
|
Weight | 25 lbs. | (11.3 kg) | |
Height | 3.5 in. | (8.9 cm) | |
Width | 19 | in. | (48.3 cm) |
Depth | 15 | in. | (38 cm) |
THIS EQUIPMENT CONFORMS TO THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
7
