OIL & FILTER CHANGE

Refer to Figure 14 for oil filter, dipstick and filler neck locations.

To drain the oil:

1.Place a drain pan below the engine oil pan.

2.Remove the oil drain plug and allow the engine oil to completely drain.

3.Remove and replace the oil filter

4.Reinstall the oil drain plug.

5.Refill the engine oil. See the engine owners manual for oil recommendations.

Regular Maintenance

C

B

A

Figure 14. Change Oil & Filter

A.Oil Filter

B.Crankcase Dip Stick

C.Oil Fill Cap

CHECK / CHANGE AIR FILTER

Refer to the engine owners manual for specific air filter service procedures. Refer to Figure 15 for air filter and service indicator locations.

Figure 15. Air Filter & Service Indicator
CHECK HYDRAULIC OIL LEVEL

NOTE: Do not open the hydraulic oil reservoir unless oil is being added.

1.Visually check that the hydraulic oil level is filled to the recess area (A, Figure 16) of the hydraulic oil reservoir.

3.If necessary, remove the reservoir cap (B) and add either Mobil 1™, 15W-50 synthetic oil or Castrol Syntec™ 5W-50 oil. DO NOT use conventional oils. Make sure area around the filler neck is free of dust, dirt, or other debris.

B

A

Figure 16. Hydraulic Oil Reservoir

A.Tank Recess (“FULL” level)

B.Cap

19