MOWING HEIGHT ADJUSTMENT

See Deck Lift Rod Timing Adjustment and Deck Leveling Adjustment sections to ensure that the actual cutting height is consistent with the cutting height adjustment pin placement.

The cutting height adjustment pin (A, Figure 38) controls the mower cutting height. The cutting height is adjustable between 1-1/2” (3,8cm) and 5” (12,7cm) in 1/4” (0,64cm) increments.

Depress the deck lift foot pedal (B), placing the majority of the force on the top edge of the pedal until it locks into the “TRANSPORT” position.

Place the cutting height adjustment pin in the desired cutting height. Depress the deck lift foot pedal, placing the majority of the force on the bottom edge of the pedal to release the pedal from the “TRANSPORT” position.

Troubleshooting, Adjustment & Service

B

C

A

Figure 38. Mowing Height Adjustment

A.Cutting Height Adjustment Pin

B.Deck Lift Foot Pedal

C.Cutting Height Selection Decal

31