Regular Maintenance

LUBRICATION

Lubricate the unit at the locations shown in FIgure 23 through 29 as well as the following lubrication points.

Grease:

front caster wheel axles

rear suspension a-arms

rear deck mounts

deck lift pivots

deck lift foot pedal

blade spindles

Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.

Not all greases are compatible. Ferris Red Grease (P/N 22285) is recommended, automotive-type high- temperature, lithium grease may be used when this is not available.

Oil:

control handle pivots

floor plate hinge

discharge chute hinge

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubri- cation.

Figure 23. Deck Lift Pedal & PivotsFigure 24. Deck Lift Linkage PivotsFigure 25. Deck Lubrication

26

03