Ferris Industries 5900647, 5900645 Operation, General Operating Safety, Checks Before Starting

Operation

GENERAL OPERATING SAFETY

Before first time operation:

•Be sure to read all information in the Safety and Operation sections before attempting to operate this tractor and mower.

•Become familiar with all of the controls and how to stop the unit.

•Drive in an open area without mowing to become accustomed to the unit.

CHECKS BEFORE STARTING

•Check that crankcase is filled to full mark on dipstick (B, Figure 2). See the engine Operator’s Manual for instructions and oil recommendations.

•Make sure all nuts, bolts, screws and pins are in place and tight.

•Fill the fuel tank (A) with fresh fuel. Refer to engine manual for fuel recommendations.

•Check the hydraulic oil tank (C) and make sure that the oil level is up to the FULL COLD mark.

WARNING

Before leaving the operator’s position for any reason, engage the parking brake, disengage the PTO, stop the engine and remove the key. To reduce fire hazard, keep the engine, tractor and mower free of grass, leaves and excess grease. Do not stop or park tractor over dry leaves, grass or combustible materials. Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

	C
A	B

Figure 2. Pre-start Checks

A.Fuel Tank Filler Neck

B.Crankcase Oil Fill

C.Hydraulic Oil Fill

16 www.ferrisindustries.com