STORAGE

Temporary Storage (30 Days Or Less)

Remember, the fuel tank will still contain some gasoline, so never store the unit indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the unit in any structure used for human or animal habitation.

Here is a checklist of things to do when storing your unit temporarily or in between uses:

•Keep the unit in an area away from where children may come into contact with it. If there’s any chance of unauthorized use, remove the spark plug (s) and put in a safe place. Be sure the spark plug opening is protected from foreign objects with a suitable cover.

•If the unit can’t be stored on a reasonable level surface, chock the wheels.

•Clean all grass and dirt from the mower.

Long Term Storage (Longer Than 30 Days)

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

1.Drain crankcase oil while engine is hot and refill with a grade of oil that will be required when unit is used again.

2.Prepare the mower deck for storage as follows:

a.Remove mower deck from the unit.

b.Clean underside of mower deck.

c.Coat all bare metal surfaces with paint or light coat of oil to prevent rusting.

3.Clean external surfaces and engine.

4.Prepare engine for storage. See engine owner’s manual.

5.Clean any dirt or grass from cylinder head cooling fins, engine housing and air cleaner element.

6.Cover air cleaner and exhaust outlet tightly with plastic or other waterproof material to keep out moisture, dirt and insects.

7.Completely grease and oil unit as outlined in the Normal Care section.

8.Clean up unit and apply paint or rust preventative to any areas where paint is chipped or damaged.

9.Be sure the battery is filled to the proper level with water and is fully charged. Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If battery is left in unit, disconnect the negative cable.

Operation

WARNING

Never store the unit, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.) and cause an explosion.

Handle gasoline carefully. It is highly flammable and careless use could result in serious fire damage to your person or property. Drain fuel into an approved container outdoors away from open flame or sparks.

10.Drain fuel system completely or add a gasoline stabilizer to the fuel system. If you have chosen to use a fuel stabilizer and have not drained the fuel system, follow all safety instructions and storage precautions in this manual to prevent the possibility of fire from the ignition of gasoline fumes. Remember, gasoline fumes can travel to distant sources of ignition and ignite, causing risk of explosion and fire.

NOTE: Gasoline, if permitted to stand unused for extended periods (30 days or more), may develop gummy deposits which can adversely affect the engine carburetor and cause engine malfunction. To avoid this condition, add a gasoline stabilizer to the fuel tank and run the engine a few minutes, or drain all fuel from the unit before placing it in storage.

STARTING AFTER LONG TERM STORAGE

Before starting the unit after it has been stored for a long period of time, perform the following steps.

1.Remove any blocks from under the unit.

2.Install the battery if it was removed.

3.Unplug the exhaust outlet and air cleaner.

4.Fill the fuel tank with fresh gasoline. See engine manual for recommendations.

5.See engine owner’s manual and follow all instructions for preparing engine after storage.

6.Check crankcase oil level and add proper oil if necessary. If any condensation has developed during storage, drain crankcase oil and refill.

7.Inflate tires to proper pressure. Check fluid levels.

8.Start the engine and let it run slowly. DO NOT run at high speed immediately after starting. Be sure to run engine only outdoors or in well ventilated area.

23

Page 24 Page 26
Page 25
Image 25
Ferris Industries 5900637, 5900645, 5900636, 5900646 Starting After Long Term Storage, Temporary Storage 30 Days Or Less
Page 24 Page 26

5900633, 5900647, 5900972, 5900644, 5900637 specifications

Ferris Industries has consistently pushed the envelope in landscaping equipment with their notable series of mowers, particularly evident in model numbers 5900636, 5900638, 5900635, 5900647, and 5900645. Each of these models reflects their commitment to durability, efficiency, and performance, making them ideal for both commercial and residential use.

The 5900636 model is recognized for its impressive cutting width and powerful engine, providing users with a robust solution for tackling large lawns or expansive commercial areas. It is engineered with a heavy-duty frame that ensures stability, while its advanced suspension system enhances maneuverability and comfort during extended use. The ergonomic controls and comfortable seating add to the user experience, making it suitable for long hours of operation.

Meanwhile, the 5900638 stands out due to its innovative cutting technology. This model features a precision cutting deck that enables a clean cut, resulting in a well-manicured appearance for lawns. Additionally, it boasts a state-of-the-art grass collection system that minimizes clumping and ensures efficient debris management. This results in a healthier lawn and less time spent on cleanup.

The 5900635 is tailored for those who prioritize speed without compromising quality. Equipped with a high-performance engine, it allows for rapid mowing without sacrificing power or efficiency. Its fuel-efficient design ensures that users can cover larger areas with less downtime for refueling. The model also incorporates advanced safety features, promoting secure operation.

The 5900647 and 5900645 models are perfect for professionals who require versatile equipment. Both feature adjustable cutting heights, allowing users to customize their mowing based on the type of grass or terrain they are working with. The user-friendly interface simplifies operation, while the durable tires provide excellent traction on various surfaces. Their design is also optimized for easy transport and storage, making them convenient for contractors who may need to move equipment frequently.

In conclusion, Ferris Industries' models 5900636, 5900638, 5900635, 5900647, and 5900645 embody the brand's dedication to innovation and quality in landscaping equipment. With advanced features and technologies, they cater to a broad range of mowing needs, from residential lawns to commercial landscaping, ensuring users achieve the best results while enjoying a comfortable and efficient mowing experience.
Top Page Image Contents