Features & Controls
Parking Brake
|
|
|
|
|
|
| DISENGAGE | Releases the parking |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| brake. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ENGAGE | Locks the parking |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| brake. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged.
Deck Lift Pedal, Cutting
Height Adjustment Pin & Deck Lift Lock
Lever
FUEL TANK CONTROLS
These control the cutting height of the mower deck. Depress the pedal until it locks into the 5” (12,7cm) position. Place the adjustment pin in the desired cutting height and release the lift lock lever.
|
|
|
|
|
|
|
| Fuel Tank | |
|
|
| Hour Meter |
|
|
|
| (One valve per ta k) | |
|
|
|
|
| The fuel shut ff valves are located on the front of the | ||||
The hour meter measures the number of hours the |
| ||||||||
| pr pane anks. Turn the knob CLOCKWISE to close | ||||||||
PTO has been engaged. The hour meter has a self | |||||||||
the fuel shut off valve. Turn the knob COUNTER- | |||||||||
contained power source so the total hours are always | |||||||||
CLOCKWISE to open the fuel shut off valve. | |||||||||
|
|
|
|
|
| ||||
visible. | Not | orf |
| ||||||
| When operating the unit, only one fuel tank | ||||||||
Instrument Control Panel |
| ||||||||
| valve sho ld be open at a time, so that LP gas is only | ||||||||
(S/N: 2014953657 & Above) |
| rawn from one tank at a time. | |||||||
|
|
|
|
| The propane tanks are equipped with a excess flow | ||||
|
|
|
|
| valve that will automatically close and stop the flow of | ||||
|
|
|
|
| propane from the tank if the flow of propane exceeds | ||||
|
|
|
|
|
| ||||
|
|
|
|
|
| the specified rate. |
ReproductionFuel Level Guage
Displays the fuel level in the tank.
3
GB