Features & Controls

Features & Controls

Instrument Control Panel (S/N: 2014953656 & Below)

Note: The further a lever is moved awayReproductionfrom the

CONTROL FUNCTIONS

 

for

The information below briefly describes the functi n of individ al controls. Starting, stopping, driving, and

mowing require the combined use of several c ntr

ls applied in specific sequences. To learn what combination

and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Control LeversNot
Seat Adjustment Lever

These levers control the ground speed of the rider.

The seat can be adjusted forward and back. Move

The left lever controls the left rear drive wh l and

the lever forward, position the seat as desired, and

the right controls the right rear drive wh

l.

release the lever to lock the seat in position.

Moving a lever forward increases the FO

WARD

 

speed of the associated wheel, and pulling back on a

 

Ignition Switch

lever increases the REVERSE speed.

 

The ignition switch starts and stops the engine, it has

 

neutral position the faster the drive wheel will turn.

three positions:

 

 

See the Operation section for steering instructions.

PTO (Power Take Off) Switch

The PTO switch engages and disengages the mower. Pull UP on the switch to engage the mower, and push DOWN to disengage the mower.

Throttle Control

OFF

Stops the engine and shuts off the

 

electrical system.

RUN

Allows the engine to run and powers

 

the electrical system.

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

Moving the throttle control fully forward is FULL throttle position. Always operate the unit at FULL throttle when mowing.

2

 

www.ferrisindustries.com

GB