Onkyo DV-SP503E Front & Rear Panels-Continued, European Model, A Audio Output, D Video Output

Front & Rear Panels—Continued

Rear Panel

■European Model

1 234 5 6 7 8 9

AUDIO OUTPUT

FRONT/D. MIX				DIGITAL
1	2	SURR	CENTER	COAXIAL

L

R
SUB	OPTICAL
WOOFER

	VIDEO OUTPUT
COMPONENT		REMOTE
Y	PB
		CONTROL

S VIDEO AV CONNECTOR AC INLET

SUPER AUDIO CD & DVD AUDIO/

VIDEO PLAYER

MODEL NO. DV-SP503E

RATING: AC 100-240V

50/60Hz 12W

VIDEO PR

AAUDIO OUTPUT [22–23]

These jacks output analog audio. The FRONT/ D.MIX jacks can be connected to the stereo input on a TV, hi-fi amp, or other component. The 1 and 2 jacks output the same signals so you can use either. DVDs with 5.1-channel audio are downmixed into two channels before being output by the FRONT/ D.MIX jacks.

If you’re using an AV receiver or surround decoder with a 5.1-channel analog audio input, use the FRONT/D.MIX 1 or 2 jacks and the SURR L/R, CENTER, and SUBWOOFER jacks. In this case, you must set the Audio Output Mode on the Initial Setup menu to 5.1 Channel. With this setting, the FRONT/D.MIX jacks will output the front signals, and the SURR L/R, CENTER, and SUBWOOFER jacks will output the surround, center, and sub- woofer signals respectively.

BCOAXIAL DIGITAL AUDIO OUTPUT [22]

This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

COPTICAL DIGITAL AUDIO OUTPUT [22]

This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

DVIDEO OUTPUT [19]

This RCA connector can be used to connect a TV or projector with a composite video input.

ECOMPONENT VIDEO OUTPUT [20]

These jacks output component video and can be connected to an component video input on a TV or projector.

FS VIDEO OUTPUT [20]

This connector can be used to connect a TV or pro- jector with an S Video input.

GAV CONNECTOR [20]

This SCART output can be connected to a TV or projector with a SCART input by using the supplied SCART cable. This SCART connector outputs 2- channel stereo audio, composite video, S Video, and RGB video.

H jack [23]

These (Remote Interactive) connectors can be

connected to the connectors on your other Onkyo AV components for interactive control.

Connecting an cable only does not make the system operational. You must also connect the audio cables as well.

IAC INLET [24]

The supplied power cord is connected here. The other of the power cord should be connected to a suitable wall outlet.

15