Onkyo DV-SP503E Learning a pre-programming code, Controlling a TV, the component that you want to

Using the Remote controller with Other Brand’s TVs (North American model only)

Learning a pre-programming code

	ON	STANDBY	OPEN /
			CLOSE
			PLAY MODE
	1	2	3
			DISPLAY
Numbers	4	5	6
			DIMMER
	7	8	9
		0	CLEAR
	TOP MENU		MENU
				/ / /
		ENTER		Enter
	RETURN		SETUP
	AUDIO	ANGLE SUBTITLE ZOOM
		TV CONTROL
On/		TV/VIDEO	CHANNEL	TV Control
	ON /		VOLUME
	STANDBY

Standby

RC-582DV

You can make RC-582DV remote controller to operate a TV from other brand than Onkyo by storing the pre-pro- gramming code of the brand in the RC-582DV.

5	Press some operation buttons for
	the component that you want to
	operate to check if the system
	operates properly.
	If the system operates properly, the code
	is correct. If the component does not
	operate properly, return to step 2.

Notes:

•With some brand’s components, some buttons may not work correctly.

•If more than one code is given in the table, try the code one by one until you reach the code for your compo- nent (i.e. if the first code does not work, then try the next).

•The code can be retained by changing the batteries within 1 minute. If the code is lost, store the pre-pro- gramming code again.

Controlling a TV

1 ON /	Press ON/STANDBY to turn on the
	device.
STANDBY

1		Find the 3-digit number for the
		brand name of the component that
		you want to operate in the table on
		page 59.
2		Turn on the TV that you want to
		operate.
3 ON /		While holding down the ON/
		STANDBY on the RC-582DV that
	STANDBY
		you want to program, press Enter,
		and then release both buttons.
		(Make sure you press ON/STANDBY
		before Enter.)
	ENTER
4		Within 10 seconds, enter the 3-
1	2	3 digit code number.
4	5	6
7	8	9
	0

2

CHANNEL

VOLUME

TV/VIDEO

Press the desired operation but- ton.

+: Changes the TV channel upward.

– : Changes the TV channel down- ward.

: Increases the TV volume.

:Decrease the TV volume. TV/VIDEO:

Switches the TV/VCR inputs.

58