Onkyo instruction manual Connecting Your TV, Connecting the DV-SP503E-Continued, Using S Video

Connecting the DV-SP503E—Continued

Connecting Your TV

•Connect the DV-SP503E to the TV directly. If you connect the DV-SP503E to a VCR, TV/VCR combina- tion, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Using S Video

If your TV (or other equipment) has an S Video input, you can use this instead of the standard (composite) out- put for a better quality picture.

•Use an S Video cable (supplied) to connect the S VIDEO OUTPUT to an S Video input on your TV (or monitor or AV receiver).

Line up the small triangle above the jack with the same mark on the plug before plugging in.

	AUDIO OUTPUT				VIDEO OUTPUT
MIX			DIGITAL	COMPONENT			REMOTE
2	SURR	CENTER	COAXIAL	Y	PB
						SUPER AUDIO CD & DVD AUDIO/	CONTROL
						VIDEO PLAYER

S VIDEO MODEL NO. DV-SP503E

	S VIDEO		RATING:	60 Hz	11W
			AC 120V
SUB	OPTICAL	VIDEO	PR
WOOFER

TV

S VIDEO IN

Note:

•Watching progressive scan video from the component video outputs

This player can output progressive scan video from the component video output. Compared to interlace video, progressive scan video effectively doubles the scan- ning rate of the picture, resulting in a very stable, flicker-free image. To set up the player for use with a progressive scan TV, see Video Output settings on page 46. When the player is set to output progressive scan video, the PROGRESSIVE indicator lights in the front panel display.

Important:

•If you connect a TV that is not compatible with a pro- gressive scan signal and switch the player to progres- sive, you will not be able to see any picture at all. In this case, switch everything off and reconnect using the supplied video cable, then switch back to Interlace (see page 21).

Using SCART (European model only)

If your TV has a SCART-type AV input, you can use a SCART cable to connect this player to your TV. This type of connection carries both the sound and the picture, so there’s no need to connect up the AUDIO OUTPUT L/R and VIDEO OUTPUT jacks.

•Use a SCART cable (supplied) to connect the AV CONNECTOR to an AV input on your TV.

Using Component Video			VIDEO OUTPUT
	DIGITAL	COMPONENT		AV CONNECTOR
			S VIDEO
	COAXIAL	Y	PB	REMOTE
				CONTROL
				SUPER AUDIO CD & DVD AUDIO/
				VIDEO PLAYER
You can use the component video output instead of the		VIDEO	PR	MODEL NO. DV-SP503E
				RATING: AC 100-240V
	OPTICAL			50/60Hz 12W
standard video out jack to connect this player to your TV
(or other equipment).
This should give you the best quality picture from the			AV CONNECTOR
three types of video output available.

•Use a component video cable (not supplied) to con-

nect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV, monitor or AV receiver.

	AUDIO	CENTER	COAXIAL	Y	VIDEO OUTPUT
COMPONENT12					PB
	FR NT/D. MIX		DIGITAL	COMPONENT
L	Y				S VIDEO

SUB	OPTICAL	VIDEO	PR
WOOFER

TV

PR

COMPONENT

VIDEO IN

Y PB PR

TV

SCART

This connector can output composite video, S Video, or RGB video. The default setting is composite, which should work with all TVs. Consult the manual that came with your TV to see if you can use one of the higher qual- ity settings. See page 46 for how to change the video out- put.

20