Onkyo DV-SP503E 1 234 5, Front & Rear Panels-Continued, Not European model, A Audio Output

Front & Rear Panels—Continued

Rear Panel

■ Not European model

1 234 5 6

		AUDIO OUTPUT				VIDEO OUTPUT
FRONT/D. MIX				DIGITAL	COMPONENT
1	2	SURR	CENTER	COAXIAL	Y	PB
L						S VIDEO

R
SUB	OPTICAL	VIDEO	PR
WOOFER

See page 15 for the European model.

AAUDIO OUTPUT [22–23]

These jacks output analog audio. The FRONT/ D.MIX jacks can be connected to the stereo input on a TV, hi-fi amp, or other component. The 1 and 2 jacks output the same signals so you can use either. DVDs with 5.1-channel audio are downmixed into two channels before being output by the FRONT/ D.MIX jacks.

If you’re using an AV receiver or surround decoder with a 5.1-channel analog audio input, use the FRONT/D.MIX 1 or 2 jacks and the SURR L/R, CENTER, and SUBWOOFER jacks. In this case, you must set the Audio Output Mode on the Initial Setup menu to 5.1 Channel. With this setting, the FRONT/D.MIX jacks will output the front signals, and the SURR L/R, CENTER, and SUBWOOFER jacks will output the surround, center, and sub- woofer signals respectively.

BCOAXIAL DIGITAL AUDIO OUTPUT [22]

This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

COPTICAL DIGITAL AUDIO OUTPUT [22]

This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

		7	8
		REMOTE
SUPER AUDIO CD & DVD AUDIO/		CONTROL
VIDEO PLAYER				AC INLET
MODEL NO. DV-SP503E
RATING:
AC 120V	60 Hz 11W

DVIDEO OUTPUT [19]

This RCA connector can be used to connect a TV or projector with a composite video input.

ECOMPONENT VIDEO OUTPUT [20]

These jacks output component video and can be connected to an component video input on a TV or projector.

FS VIDEO OUTPUT [20]

This connector can be used to connect a TV or pro- jector with an S Video input.

G jack [23]

These (Remote Interactive) connectors can be

connected to the connectors on your other Onkyo AV components for interactive control.

Connecting an cable only does not make the system operational. You must also connect the audio cables as well.

HAC INLET [24]

The supplied power cord is connected here. The other of the power cord should be connected to a suitable wall outlet.

14