Section 4 | Maintenance |
|
|
Step 16 The ice machine will stop after the sanitize cycle (approximately 30 minutes). Place the toggle switch in the OFF position and disconnect power to the ice machine.
!Warning
Disconnect the electric power to the ice machine at the electric service switch box..
Step 17 Repeat step 6 for hand sanitizing.
Step 18 Mix a solution of sanitizer and warm water.
Solution Type | Water | Mixed With |
Sanitizer | 6 gal. (23 l) | 4 oz (120 ml) sanitizer |
Step 19 Use 1/2 of the sanitizer/water solution to sanitize all removed components. Use a cloth or sponge to liberally apply the solution to all surfaces of the removed parts or soak the removed parts in the sanitizer/water solution. Do not rinse parts after sanitizing.
Step 20 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice machine and bin (or dispenser). Use a cloth or sponge to liberally apply the solution. When sanitizing, pay particular attention to the following areas:
•Side walls
•Base (bottom of the water trough)
•Interior of water trough
•Evaporator cells and evaporator plastic parts - including top, bottom and sides
•Bin or dispenser
•Ice machine top cover
Do not rinse the sanitized areas. Remove the water trough drain plug and wipe with solution. When the sanitizer solution has drained from the trough, reinstall the water trough drain plug.
Step 21 Install the removed parts, restore power and place the toggle switch in the ICE position.
Part Number 000001114 |
