Ferris Industries 5900822 CONTROL FUNCTIONS, Ignition Switch, Ground Speed Control Lev rs, Seat Adjustment Lever

Note: The further a lever is moved away from the neutral position the faster the drive wheel will turn.

See the Operating the Zero Turn Rider section for steering instructions.

14

CONTROL FUNCTIONS

The ignition switch starts and stops the engine, it has three positions:

Ignition Switch

The information below briefly describesReproductionNotthe function forf in ivi ual controls. Starting, stopping, driving, and mowing require the combined use of several cont ls applied in specific sequences. To learn what combination

and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Control Lev rsSeat Adjustment Lever

These levers control the ground speed of the rid r. The seat can be adjusted forward and back. Move the

The left lever controls the left rear drive wheel and lever towards the left, position the seat as desired,

the right lever controls the right rear drive wheel. and release the lever to lock the seat in position.

Moving a lever forward increases the FORWARD speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

Features & Controls

OFF	Stops the engine and shuts off the
	electrical system.
RUN	Allows the engine to run and powers
	the electrical system.
START	Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the

battery.

www.ferrisindustries.com