Ferris Industries 5900822 CHECK TIRE PRESSURES, psi, bar, Pressure, Every 25 Hours, Every 50 Hours, Every 25 Hours, Before Each Use, Before Each Use, Every 100 Hours, Every 250 Hours

Regular Maintenance

MAINTENANCE SCHEDULE

The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter.

MOWER MAINTENANCE			ENGINE MAINTENANCE
Before Each Use			Before Each Use
Check Safety Interlock System			Check Engine Oil Level
Check Rider Brakes			Every 25 Hours
Check for loose hardware			Check / Clean Cooling Fins & Intake*
Check Hydraulic Oil Level			Every 50 Hours
Every 25 Hours			Check / Clean Spark Arrester**
Clean Deck & Check / Replace Mower Blades*			Refer to Engine Owner’s Manual
Lubricate Rider & Mower*			Service Air Filter
Check Tire Pressure			Check / Replace Spark Plugs
Every 100 Hours			Check / Replace Fuel Filter
Clean Battery & Cables			Check / Clean Spark Arrester
Every 250 Hours			* Mo e often in hot (over 85° F: 30° C) weather or
Change Hydraulic Oil & Filter			dusty operating c ditio s.
* More often in hot (over 85° F: 30° C) weather or			** If equipped. Replace if damaged.
		for
dusty operating conditions.
CHECK TIRE PRESSURES
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. ote
that these pressures may differ slightly from the “Max
Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.	Not
	Reproduction
				Tire	Pressure
					psi	bar
				Front	25	1,72
				Rear	15	1,03

Figure 14. Checking Tire Pressure

25