Regular Maintenance
LUBRICATION
Lubricate the machine at the lubrication points shown in Figures 6 - 11.
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Ferris Red Grease
(P/N 22285) is strongly recommended.
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.
Figure 6. Motion Control Pivot & Rod Pivot
Figure 7. Lower Motion Control Pivots & Neutral Return Pedal Pivot
Figure 8. Blade Spindles
Figure 9. Caster Tire Pivots & Axles
Figure 10. Steering Lever Pivots & Operator Presence Pivots
Figure 11. Parking Brake Lever Pivot & Link Pivot
16
