Safety Rules & Information

OPERATION

Never run an engine in an enclosed area.

Mow only in the daylight or with good artificial light, keeping away from holes and hidden hazards.

Be sure all drives are in neutral and parking brake is engaged before starting engine. Only start engine from the operator’s position. Use seat belts if provid- ed.

Be sure of your footing while using pedestrian con- trolled equipment, especially when backing up. Walk, don't run.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while trav- eling in reverse.

Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the deflec- tor in place.

Slow down and use caution when making turns and when changing directions on slopes.

Never raise deck with the blades running.

Never leave a running unit unattended. Always disen- gage the PTO, set parking brake, stop engine, and remove keys before dismounting. Keep hands and feet away from the cutting units.

Turn off the PTO switch to disengage the blades when not mowing.

Never operate with guards not securely in place. Be sure all interlocks are attached, adjusted properly and functioning properly.

Never operate with the discharge deflector raised, removed or altered, unless using a grass catcher.

Do not change the engine governor setting or over- speed the engine.

Stop on level ground, lower implements, disengage drives, engage parking brake, shut off engine before leaving the operator’s position for any reason includ- ing emptying the grass catchers or unclogging the chute.

Stop equipment and inspect blades after striking objects or abnormal vibration occurs. Make neces- sary repairs before resuming operations.

Keep hands and feet away from the cutting units.

Never carry passengers and keep pets and bystanders away.

Do not operate the unit while under the influence of alcohol or drugs.

Slow down and use caution when making turns and crossing roads and sidewalks. Stop blades if not mowing.

Use care when loading or unloading the machine into a trailer or truck.

Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not drive on it.

Do

Mow across the face of slopes; never up and down.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obsta- cles.

Use slow speed. Choose a slow speed so that you will not have to stop or change speed while on the slope.

Use extra care with grass catchers or other attach- ments. These can change the stability of the unit.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

See your authorized dealer for recommendations of available weights to improve stability.

WARNING

Never operate on slopes greater than 20°

(36.4 percent) which is a rise of 7-1/4 feet (220 cm) vertically in 20 feet (607 cm) horizontally.

Select slow ground speed before driving onto slope. In addition to front and rear weights, use extra caution when operating on slopes with rear-mounted grass catcher.

Mow ACROSS the slope, never up and down the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

Do Not

Do not start or stop on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embank- ments. The operator could lose footing or balance or mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced footing or trac- tion could cause sliding.

Do not try to stabilize the unit by putting your foot on the ground.

Do not mow excessively steep slopes.

Do not use grass catcher on steep slopes.

4

Page 6
Image 6
Ferris Industries DDSKAV15CE, DDSKAV17CE, DDSKAV23CE manual Safety Rules & Information, Slope Operation, Do Not

DDSKAV17CE, DDSKAV15CE, DDSKAV23CE specifications

Ferris Industries has long been a leader in the outdoor power equipment industry, known for delivering innovative and reliable solutions for landscaping and maintenance professionals. Among its impressive lineup, the Ferris DDSKAV23CE, DDSKAV15CE, and DDSKAV17CE stand out as robust and efficient models designed to meet the demanding needs of lawn care and agricultural operations.

The DDSKAV23CE is equipped with a powerful 23 horsepower engine that enhances performance across various terrains. One of its main features is the advanced suspension system, which allows for superior handling and comfort during use. This model also incorporates a state-of-the-art hydrostatic drive system, providing smooth and precise acceleration, making it an ideal choice for operators who require high maneuverability and control on uneven grounds.

The DDSKAV15CE offers a compact yet powerful option, boasting a 15 horsepower engine. This model is particularly designed for smaller properties or residential use, where agility and ease of operation are paramount. Its lightweight design does not compromise durability, allowing users to traverse tight spots effortlessly. The DDSKAV15CE also incorporates ergonomic controls for reduced operator fatigue during extended use.

On the other hand, the DDSKAV17CE blends power and efficiency with its 17 horsepower engine. This model features a larger cutting deck, which increases productivity by allowing the user to cover more ground in less time. The DDSKAV17CE is also equipped with enhanced traction capabilities, ensuring it can handle wet or hilly terrains without losing performance.

All three models utilize Ferris's patented iCD Cutting System, which provides a superior quality of cut and maintains a consistent performance even in challenging mowing conditions. The cutting decks are designed for easy maintenance and longevity, ensuring your investment can endure the rigors of frequent use.

Moreover, each model is built with rugged aluminum frame construction that enhances durability while reducing overall weight, further improving maneuverability and reducing operator fatigue.

In summary, Ferris Industries' DDSKAV23CE, DDSKAV15CE, and DDSKAV17CE models combine power, efficiency, and innovative technology, making them ideal solutions for landscaping professionals and property owners seeking reliable outdoor equipment. Their unique blend of features caters to varied landscape maintenance needs, ensuring they are equipped to handle the toughest tasks.