Festool 564274 Chuck BF-FX, Angle attachment XS-AS, Tool holder in the drill spindle

XWhen attaching the tool, rotate until the hexa- gon shank [6-1]engages in the hexagon holder on the drill spindle.

XRelease the ring [6-2].

Chuck BF-FX 8

The chuck BF-FX 8 is used for clamping drill and screwdriver bits up to 8 mm chuck diameter.

BF-FX 8

7-2 7-3 7-4

7-1

7-5

7

Attaching the chuck BF-FX 8

XAttach the chuck to the drill spindle [7-5].

XPull the release ring [7-3]forwards.

XTurn until the hexagon pin [7-4]on the chuck engages in the hexagon socket holder in the drill spindle.

XPush the chuck all the way onto the drill spindle.

XRelease the ring [7-4].

Detaching the chuck BF-FX

XPull the release ring [7-4]forwards.

XRemove the chuck.

Changing tools

XTurn the clamping sleeve [7-2]anticlockwise to open the clamping jaws [7-1].

The arrow on the spindle indicates the opening direction.

XInsert the tool into the chuck.

CAUTION

Risk of injury

X Clamp the tool centrally in the chuck!

XTurn the clamping sleeve [7-2]clockwise to clamp the tool.

Angle attachment XS-AS

The angle attachment XS-AS (partly accessories) allows you to work (drill, fasten) vertically in rela- tion to the longitudinal axis on the machine.

XS-AS 8-2

8-1

8

Fitting the angle attachment XS-AS

XPull the green release ring [8-1]forwards.

XFit the angle attachment to the drill spindle [8- 2].

XTurn the attachment until is engages in the re- quired position.

You can engage the angle attachment in 16 dif- ferent positions.

XRelease the ring [8-1].

Removing the angle attachment XS-AS

XPull the green release ring [8-1]forwards.

XRemove the angle attachment.

Changing tools

THe tools can be fixed on the angle attachment via CENTROTEC tool chuck, the chuck BP-XS 8 or di- rectly into the drill spindle.

Tool holder in the drill spindle

Bits can be inserted directly in the hexagon socket holder on the drill spindle [9-1]to shorten and re- duce the weight of the machine.

9

9-1

12