Aluminium processing
The following precautions are to be taken when processing alu- minium for safety reasons:
•
•Connect the machine to a suitable dust extractor.
•Clean tool regularly of dust accumulations in the motor housing.
•Wear protective goggles.
Accessories, tools
For safety reasons, only use original Festool accessories and tools!
Festool offers you a comprehensive range of accessories for your router:
•Routing tools for different applications.
•Guide rails for straight routing.
•Runner bases for different applications.
The accessory and tool order number can be found in the Festool catalogue or on the In-
ternet under
15
–Snap all four latches back to their flat po- sition (21.3) so they engage the stacking tabs of the upper systainer.
Servicing and maintenance
Any maintenance or repair work that requires opening of the motor or gear housing should only be carried out by an authorised Customer Service Centre (name supplied by your dealer)! Maintenance or repair work carried out by an unauthorised person can lead to the wrong connection of the power leads or other com- ponents, which in turn can lead to accidents with serious consequences.
To prevent accidents, always remove the plug from the power supply socket before carrying out any mainte- nance or repair work on the machine! Do not use compressed air to clean the electri- cal tool! Do not try to clean parts inside the machine in this way, as you could let foreign objects in through the openings of the ma- chine housing.
Systainer
Many Festool products are shipped in a unique system container, called "Systainer". This pro- vides protection and storage for the tool and accessories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.
Certain cleaning agents and solvents are harmful to plastic parts.
Some of these are: gasoline, carbonyl chlo- ride, cleaning solutions containing chlorine, ammonia and household cleaners containing ammonia.
•To assure the circulation of air, the cool air vents in the motor housing must always be kept clear and clean.
•This unit is fitted with special, automati- cally disconnecting carbon brushes. If these
21.3 | become worn, the current is automatically | |
switched off and the unit shuts down. In | ||
|
21.2this case, take the unit to an authorised Customer Service Centre and have the carbon brushes changed.
21.1
Warranty
–Place one systainer on top of the other.
–Release all four latches on the lower sys- tainer by pulling back at their top edges (21.1).
–Slide all four latches upward (21.2).
Conditions of 1+2 Warranty
You are entitled to a free extended warranty (1 year + 2 years = 3 years) for your Festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty. During the second and third year of
