Page 6 of 16 |
4.Configuring the FieldServer as a DF1 Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FS).
This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a DF1 Server
4.1.Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for DF1 communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes” section, and the data required from the Servers needs to be mapped in the “Client Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
Section Title |
|
| |
Data_Arrays |
|
| |
Column Title | Function | Legal Values | |
Data_Array_Name | Provide name for Data Array | Up to 15 alphanumeric | |
characters | |||
|
| ||
Data_Format | Provides data format | INT16, INT32, BIT, FLOAT | |
Data_Array_Length | Number of Data Objects |
Example
// Data Arrays |
|
|
Data_Array_Name, | Data_Format, | Data_Array_Length |
DA_AI_01, | Float, | 200 |
DA_AO_01, | Float, | 200 |
DA_DI_01, | Bit, | 200 |
DA_DO_01, | Bit, | 200 |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
