FieldServer FS-8700-128 Client Side Connection Descriptions, Client Side Node Descriptors

FS-8700-128 Safetran SCS-128 Manual Page 7 of 15

4.2.Client Side Connection Descriptions

	Section Title
	Connections
	Column Title		Function			Legal Values
	Port		Specify which port the device is connected			P1-P81
			to the FieldServer
						SCS-128
	Protocol		Specify protocol used			SCS128
						Safetran SCS-128
	Baud*		Specify baud rate			75, 150, 300 ,600, 1200, 2400, 9600
						(Vendor limitation)
	Parity*		Specify parity			Even (Vendor limitation)
	Data_Bits*		Specify data bits			8 (Vendor limitation)
	Stop_Bits*		Specify stop bits			1 (Vendor limitation)
	Handshaking*		Specify hardware handshaking			None
	Poll_Delay*		Time between internal polls			0-32000 seconds, 0.05 seconds
	Example
//		Client Side Connections
	Connections
	Port,		Protocol,	Baud,	Parity,	Handshaking,	Poll_Delay
	P8,		SCS-128,	9600,	Even,	None,	0.100s

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title		Function			Legal Values
Node_Name	Provide name for Node			Up	to 32 alphanumeric
				characters
Node_ID	SCS-128 station address of physical Server Node			1-127
				SCS-128
Protocol	Specify protocol used			SCS128
				Safetran SCS-128
Connection	Specify which port the device is connected to the			P1-P81
	FieldServer
SCS128_Ack*	If ON, Ack will be sent to Server upon receipt of every			OFF, ON
	indication response
Example
// Client Side Nodes
Nodes
Node_Name,	Node_ID,	Protocol,	Connection,			SCS128_Ack
NODE_A,	1,	SCS-128,	P8,			OFF

1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com