FieldServer FS-8700-128 instruction manual Map Descriptor Example Read Indications

FS-8700-128 Safetran SCS-128 Manual Page 9 of 15

4.5.Map Descriptor Example: Read Indications

The following Map Descriptors will read 256 indication statuses from physical Server Node_A (described in Client Side Node Descriptors section) after every 1 second. One such Map Descriptor is required for each Node.

//Client Side Map Descriptors

Map_Descriptors
Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_name	Data_Type,	SCS128_Poll_Type,	Length,	Scan_Interval
CMD_DI1,	DA_DI,	0,	RDBC,	Node_A,	Flag,	Recall,	256,	1
CMD_DI2,	DA_8I_01,	0,	RDBC,	Node_A,	Byte,	Poll,	32,	1
CMD_DI3,	DA_16I_01,	0,	RDBC,	Node_A,	Register,	2,	16,	1
CMD_DI4,	DA_32I_01,	0,	RDBC,	Node_A,	32-Bit_Reg,	1,	8,	1

Name of one of the

Starting

offset

One of the Nodes

Number

of consecutive

Data Arraya defined

in

Data

Array

declared

in

Node

locations

in

the

Data

in the Data_Array

to

hold

1st

Section.

Indications

array to be used for

section.

Indication

indication

will be read from the

storing data

from

the

statuses

will

be

status

station

address

Server.

stored in

this

Data

belonging

to

this

Array

Node

Frequency (in seconds) to read Indication Statuses

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com