FieldServer FS-8700-78 Map Descriptor Example 5 - Using a special / diagnostic command

Driver Manual

6.1.8Map Descriptor: Example 5 - Using a special / diagnostic command.

Map_Descrip tor_Name, Scan_Interval, Data_Array_Name , Data_Array_Offset, Function,					node_name, Address, Length, DA_Func,
A1,	1.0s,	UNUSED_ARRAY,	0	, wrb	, No_node, 0,	1 , All-Listen,

A data array must	This command
be associated with	is sent only
the map descriptor	once. If you
even though it will	need to do this
not be used. It	periodically then
may be any data	change this to a
type.	wrbc.

Must connect this map descriptor to a node whose node_id is zero. For example.

Nodes

Node_Name, Node_ID, Protocol, Port

Unit1, 0, Daire, R1

This is a special

/dianostic command. It causes a one byte message to be sent.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-6611 fax: (408) 262-9042

Visit our website: www.sierramonitor.com E-mail: sierra@sierramonitor.com Page 32