Driver Manual
4.4Client Side Map Descriptors
4.4.1FieldServer Specific Map Descriptor Parameters
| Column Title | Function | Legal Values |
| Map_Descriptor_Name | Name of this Map Descriptor | Up to 32 alphanumeric |
|
|
| characters |
| Data_Array_Name | Name of Data Array where data | One of the Data Array names |
|
| is to be stored in the | from “Data Array” section |
|
| FieldServer | above |
| Data_Array_Location | Starting location in Data Array | 0 to maximum specified in |
|
|
| “Data Array” section above |
| Function | Function of Client Map | RDBC, WRBC, WRBX, |
|
| Descriptor | Passive |
|
| The use of the WRBX keyword |
|
|
| is recommended for DART |
|
|
| configurations as |
|
|
| communications are minimized. |
|
4.4.2 Timing Parameters |
|
| |
|
|
|
|
| Column Title | Function | Legal Values |
| Scan_Interval | Rate at which data is polled | >0.1s |
4.4.3Driver Specific Map Descriptor Parameters
| Column Title | Function | Legal Values |
|
| Node_Name | Name of Node to fetch data | One of the node names |
|
|
| from | specified in “Client Node |
|
|
|
| Descriptor” above |
|
|
|
|
|
|
| Length | Length of Map Descriptor | 1 The length must always be |
|
|
|
| set to one. |
|
| Address | Starting address of read block | Not required for client |
|
|
|
| configuration. This parameters |
|
|
|
| is used in simulation |
|
|
|
| configuration only. |
|
| The following parameters apply only to the Dart Driver. |
|
| |
| DA_Func* | Tell the driver to poll the device | Everything |
|
|
| for all the data that is available. |
|
|
|
| The data is device specific. | See table 4.4.3.1 for a map of |
|
|
|
| how the data is stored in the |
|
|
| Other uses of this parameter are | Fieldserver data arrays |
|
|
| permitted. These uses are |
|
|
|
| discussed in the Advanced |
|
|
|
| Topics section of this manual. |
|
|
|
|
|
|
|
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408)
Visit our website: www.fieldserver.com
Page 8
