| Page 4 of 24 |
3.Hardware Connections
It is possible to connect a BACnet/IP device using the N1 or the N23 network ports. These ports need to be configured for BACnet/IP in the configuration file.
Configure the Controller according to manufacturer’s instructions
|
| Controller |
|
|
| Ethernet Interface | |
SITE |
| ||
ETHERNET |
|
|
|
|
|
| |
|
| ||
|
| FIELDSERVER |
|
|
| BACNET IP |
|
| CONNECTION DIAGRAM |
| |
| BASE NAME: | DATE: 12/28/04 | |
| FILE NAME: | BY: | MC |
3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
