Page 9 of 24 |
5.Configuring the FieldServer as a BACnet IP Server
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” files provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a BACnet/IP Client.
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for BACnet/IP communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the FieldServer virtual node(s) needs to be declared in the “Server Side Nodes” section, and the data to be provided to the Clients needs to be mapped in the “Server Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
5.1.Driver Specific FieldServer Parameters
Section Title |
|
|
Bridge |
|
|
Column Title | Function | Legal Values |
Title | FieldServer name | Text |
Network_number* | Specify a unique network number |
|
if there are multiple virtual Server | 5 | |
| nodes. | |
|
| |
Example |
|
|
//FieldServer Driver specific parameters Bridge
Title, |
| Network_Number |
BACnet Server, |
| 6 |
5.2.Server Side Connection Descriptors
| Section Title |
|
|
|
|
| Connections |
|
|
|
|
| Column Title | Function |
| Legal Values | |
| Adapter | Adapter Name |
| N1, N26 | |
| Protocol | Specify protocol used |
| BACnet_IP | |
| Connection_Type*7 | Specify if this Connection should act as a BBMD |
|
| |
| Server on the network. Refer to Appendix B.5 for | BBMD | |||
|
| more information. |
|
|
|
| IP_Port* | Specify the UDP port that will be used to | Any legal IP port value | ||
| communicate with other BACnet Client devices. | (1 - 65535); 47808 |
| ||
|
|
| |||
| Example |
|
|
|
|
|
|
|
|
|
|
| // Server Side Connections |
|
|
| |
| Connections |
|
|
|
|
| Adapter, | Protocol, | Connection_Type |
| |
| N1, | Bacnet_IP, | BBMD |
|
|
6Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware. 7 BBMD only runs on N1 on an X30.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
